The Colour Forge

The Colour Forge Death Rattle Green spray offers exceptional coverage and quality without the price tag.

Using a tried and tested formula this product is on par with the best in the industry.

Presented in a 500ml rattle can (25% more than other brands on the market!).

This spray is colour matched to Games Workshop’s Death Guard Green.

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

The Colour Forge Desert Sand spray offers exceptional coverage and quality without the price tag.

Using a tried and tested formula this product is on par with the best in the industry.

Presented in a 500ml rattle can (25% more than other brands on the market!).

This spray is colour matched to Games Workshop’s Zandri Dust.

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

The Colour Forge Governor Green spray offers exceptional coverage and quality without the price tag.

Using a tried and tested formula this product is on par with the best in the industry.

Presented in a 500ml rattle can (25% more than other brands on the market!).

This spray is colour matched to Games Workshop’s Castellan Green.

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

The Colour Forge Hyrax Brown spray offers exceptional coverage and quality without the price tag.

Using a tried and tested formula this product is on par with the best in the industry.

Presented in a 500ml rattle can (25% more than other brands on the market!).

This spray is colour matched to Games Workshop’s Rhinox Hide.

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

Our Matt Varnish spray does exactly what it says on the tin, only better.

This high quality product has been tested over satin varnish, gloss varnish and paint; the results are simply astounding.

If you want a matt finish for your varnish then you won’t be dissapointed.

Presented in a 500ml rattle can (25% more than other brands on the market!).

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.

Matt White spray is a hugely versatile colour for undercoats. Providing virbancy and colour clarity across a project.

The Colour Forge Matt White spray offers exceptional coverage and quality without the price tag.

Using a tried and tested formula this product is on par with the best in the industry.

Presented in a 500ml rattle can (25% more than other brands on the market!).

For the best results:

1. Shake the can thoroughly for 5 minutes.

2. Pour warm water over the body of the can to bring it up to room temperature.

3. Repeat until all paint is warmed through.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Important note Warning! Not suitable for children under 36 months.

Danger!

Extremely flammable aerosol.

Causes serious eye irritation. May cause drowsiness and dizziness. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray. Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Dispose of contents/container in accordance with local regulations. Repeated exposure may cause skin dryness or cracking.

CAUTION: Pressurized container: May burst if heated. Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Keep away from heat/sparks/open flames/hot surfaces. No smoking.